If NeoPace does not appear in the device list, you are unsure which device to select, or you cannot continue after tapping Set up, follow the steps for your situation below.
The device does not appear in the list
- Make sure NeoPace has finished starting up and is in pairing mode.
- Make sure Bluetooth is turned on and the app has the required permissions.
- Move your phone closer to NeoPace and remove obstructions between them.
- If another phone is connected to or setting up this device, disconnect it or stop setup on that phone first.
- Return to the app and search again. If the device still does not appear, tap Device not found? at the bottom of the screen and follow the Troubleshooting instructions in the app.
Multiple devices appear in the list
Check the device names and identifiers shown in the list, then select the NeoPace you want to add. If you cannot tell them apart, temporarily turn off other nearby NeoPace devices that are waiting to be added, then search again.
Setup does not continue after tapping Set up, or the connection is interrupted
- Make sure you selected the intended device and that it is still powered on.
- Keep your phone close to the device and make sure Bluetooth remains on.
- Check whether another phone is connected to or setting up this device. If so, stop setup or disconnect that phone first.
- Return to the device list, select the intended device again, and tap Set up.
- If the device no longer appears in the list, follow the Troubleshooting instructions in the app to check pairing mode, then try again.
If setup still fails after several attempts, contact NeoPace Support. Include a screenshot of the device list or error message and the steps you took before the failure.
Comments
0 comments
Please sign in to leave a comment.