If the connection is interrupted or fails while adding NeoPace, or the app cannot confirm the result, first check whether the device has already been added before deciding to retry.
Check whether setup has completed
- Make sure NeoPace is still powered on.
- Return to the app and check the device list and current status.
- If the device is shown as added, try connecting to or using it before attempting to add it again.
- If the device is not shown as added, check the connection and retry using the steps below.
When using Direct Connect
- Move your phone closer to NeoPace and make sure the device is still powered on.
- Follow the app's prompts to check that your phone is connected to the device hotspot.
- If your phone warns that the hotspot has no internet access, choose to stay connected so it does not automatically switch to another Wi-Fi network.
- Return to the app and tap Retry.
When using Wi-Fi Network
- Make sure your phone is connected to the same Wi-Fi network configured for NeoPace.
- Check that your phone can access the internet on that network.
- Move NeoPace closer to the router and check that the signal is stable.
- Return to the app and tap Retry.
Setup still fails after several retries
If the device does not respond, make sure no update is in progress before restarting it. Reopen the app and try again.
If the problem continues, contact NeoPace Support and include:
- A screenshot of the failure screen and error message;
- Whether you are using Direct Connect or Wi-Fi Network;
- Whether the device is shown as added;
- Approximately when the problem occurred and the troubleshooting steps you have tried.
Do not share your Wi-Fi password.
Comments
0 comments
Please sign in to leave a comment.